ไม่ได้แยกหมวก hardware รวมมันในนี้แหละ
นอกจาก ip1880 ยังใช้ได้กับรุ่น IP1100,IP2500
ขั้นตอนก็มีดังนี้
Step 1: Reset hardware
1.Press Resume button hold for 1 – 2 minutes
2.Open the cover
3.Release the catridge and then put catridge again
4.Close The Cover
5.Turn Off
6.then Turn On again
Step 2: Reset Software using general tools
1. Download software resetter or general tools
กด download ที่นี้จ้า2. Connect USB cable.
3.Before connect power, press and hold power button then connect the power.
4.At the same time Hold power button, and press reject button for 2 times then release power button.
5.Run software resetter for canon iP1880.
6.Don’t forget to open lock release in the software. ( note : to view locK release menu, min resolution 1024 x 728)
7.Then select Set Destination to iP1880
8.Check CLEANING and EEPROM CLEAR
9.Click MAIN and PLATEN
10. Finally test print by click TEST PATTERN1.
Refer:
http://tricks-collections.com/reset-canon-ip1880/กลัวมันจะหายเลยไป copy เค้ามาก่อนฮา
